Product ID:PVC S-40 GREY SOLVENT CEMENT
MSDS Date:03/11/1991
FSC:8010
NIIN:00N019037
MSDS Number: BLGHZ

SLUYTER CO LTD

375 STEELCASE RD EAST
MARKHAM, ON
CA

Emergency Phone: 416-475-6011

Info Phone: 416-494-9642

Cage: 37305

SLUYTER CO LTD

MARKHAM, ON CA

Telephone: 416-494-9642

Cage: 37305

TETRAHYDROFURAN (SARA III)

CAS: 109-99-9

RTECS: LU5950000

Fraction By Weight: 30-60%

OSHA PEL 200 PPM/250 STEL

ACGIH TLV: 200 PPM/250STEL;9192

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

METHYL ETHYL KETONE (2-BUTANONE) (MEK) (SARA III)

CAS: 78-93-3

RTECS: EL6475000

Fraction By Weight: 15-40%

OSHA PEL 200 PPM/300 STEL

ACGIH TLV: 200 PPM/300STEL 9192

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

DIMETHYLFORMAMIDE

CAS: 68-12-2

RTECS: LQ2100000

Fraction By Weight: 5-10%

OSHA PEL S, 10 PPM

ACGIH TLV: S, 10 PPM; 9192

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

LD50 LC50 Mixture:SEE INGREDIENTS
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SKIN: IRRITATION, DISCOMFORT OR RASH,
DRYING. TETRAHYDRAFURAN CAN BE ABSORBED THROUGH SKIN GIVING TOXIC
EFFECTS. EYE: PAIN, REDNESS, BURNING/STINGING. CAN CAUSE DAMAGE OR
BURNS. INHAL: IRRITATION TO E YES, NOSE & THROAT. HEADACHE,
DIZZINESS, NAUSEA. INGEST: SORE THROAT, ABDOMINAL PAIN, WEAKNESS
(EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ: &/OR NUMBNESS. CHRONIC: INHAL OF HIGH
CONC CAN PRODUCE CNS DEPRESSION. SYMPTOMS: DIZZINESS, NUMBNESS, &
CONFUSION. PROLONGED OR REPEATED SKIN CONTACT MAY CAUSE DRYING &
EVENTUALLY DERMATITIS .
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:EYES: FLUSH IMMED W/WATER FOR A MINIMUM OF 15 MIN. SEEK MED
ATTN. SKIN: REMOVE CONTAMINATED CLOTHING & WASH W/SOAP & WATER.
INHAL: REMOVE TO FRESH AIR. GIVE ARTIFICIAL RESPIRATION IF
BREATHING HAS STO PPED. GIVE O2 IF BREATHING IS DIFFICULT. CALL
EMERGENCY MED SERVICES. INGEST: DO NOT INDUCE VOMITING. OBTAIN MED
ATTN IMMED.

Flash Point Method:TCC
Flash Point:7F,-14C
Lower Limits:2%
Upper Limits:11.8%
Extinguishing Media:DRY CHEMICAL, ALCOHOL FOAM, CO2 (WATER FOG).
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT . USE WATER SPRAY TO COOL FIRE EXPOSED
CONTAINERS.
Unusual Fire/Explosion Hazard:CO, CO2, HYDROGEN CHLORIDE.

Spill Release Procedures:REMOVE ALL IGNITION SOURCES. RECOVER FREE
LIQUID. ADD NON COMBUSTIBLE ABSORBENT TO SPILL AREA. AVOID
BREATHING VAPORS. VENTILATE ENCLOSED SPACES. IF PRODUCT ENTERS
WATERBODIES, CONTACT ENVIRONMENTAL A UTHORITY.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:DO NOT STORE NEAR OXIDANTS, OPEN
FLAME, HEAT OR SPARKS. ADEQUATE VENTILATION IS REQUIRED. KEEP
CONTAINER TIGHTLY CLOSED.
Other Precautions:AVOID PRLNG/RPTD SKIN CONTACT. TAKE PRECAUTIONS WHEN
TRANSFERING LIQUIDS AT OR ABOVE FLASH POINT. DO NOT USE NEAR
SPARKS, HEAT, OR OPEN FLAME. AVOID BREATHING VAPORS. USE IN WELL
VENTILATED AREA. IRRI T UPON PRLNG EXPOSURE, SEVERE EYE IRRIT.

Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATOR IF TLV IS
EXCEEDED.
Ventilation:USE NATURAL OR EXPLOSION PROOF MECHANICAL VENTILATION TO
KEEP VAPOR CONCENTRATION WELL BELOW TLV.
Protective Gloves:RUBBER OR NEOPRENE GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES. (SUPP DATA)
Other Protective Equipment:EMERGENCY EYE WASH & DELUGE SHOWER .
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
EYE PROT: ADD FULL LENGTH FACESHIELD TO GOGGLES . VINYL CHLORIDE
MONOMER IS A CARCINOGEN. IT IS NOT PRESENT UNDER NORMAL USE OF
PRODUCT, BUT MAY BE RELEASED IN TRACE AMOUNTS UNDER FIRE OR DECOMP
OSITION CONDITIONS.

HCC:F3
Boiling Pt:B.P. Text:149F,65C
Melt/Freeze Pt:M.P/F.P Text:<32F,<0C
Vapor Pres:145 @20C
Vapor Density:2.5
Spec Gravity:0.90
Evaporation Rate & Reference:6 (N-BUTYL ACETATE = 1)
Solubility in Water:INSOLUBLE
Appearance and Odor:GREY COLOR, ETHER ODOR LIQUID.
Percent Volatiles by Volume:85

Stability Indicator/Materials to Avoid:YES
OXIDIZING MATERIAL, STRONG BASES, AMMONIA, CHLORINATED COMPOUNDS.
Stability Condition to Avoid:THERMAL.
Hazardous Decomposition Products:PEROXIDES, CO2, CO, HYDROGEN CHLORIDE.

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH APPLICABLE LOCAL,
STATE, FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.